RBG 2000 Series — Solid Particle Aerosol Generator

RBG 2000 Series — Rotating Brush Powder disperser for medium mass flows

DescriptionRBG 2000

The RBG system has been specified for users worldwide for over 25 years and uses a rotating brush principle to reliably disperse non-cohesive powders including mineral dusts, medical compounds, pollen etc. in the size range ‹100µm and with fine fractions ‹100nm.

Monolithic solids like chalk can be dispersed consistently as a fine aerosol with repeatable concentration.

The RBG 2000 Series is based around a dosing reservoir length of 180mm and by using an interchangeable range of reservoir diameters (16, 28, and 32mm) and adjustment of feed rates 1mm/hr to 700mm/hr, mass flowrates of 200mg/h to 562g/hr are achievable. The generators can be switched between manual and automatic modes and be controlled from an external PC if required. User access to the dosing unit is via a hinged side panel.

The standard model can operate with a 200 mbar back pressure at the outlet and has an replaceable reservoir.

An alternative version is also available as a pressurisable variant (upto 3 bar back pressure).

Model
Description
Feed Rate mm/hr
Reservior Diameter mm
Reservoir Length mm
RBG 2000
Standard
700
16 and 32
180
RBG 2000 D
High Back Pressure
700
16 and 28
180

Mass flow rates achievable with each of the reservoir diameters is shown below:

Reservoir Diameter mm
Fill Quantity g
Mass Flow mg/hr at 1mm/hr
Mass Flow mg/hr at 5 mm/hr
Mass Flow g/hr at 700 mm/hr
16
30
200
1000
140
28
49
616
3080
430
32
144
800
4000
562

Technical parameters

  • Particle material: non-cohesive powders
  • Particle size: < 100 µm
  • Mass flow dependent on powder
    • 200 mg/h – 562 g/h*
    • *with an assumed compacted density of 1 g/cm3
  • Volume flow:
    • 2.5 – 5.0 m3/h
  • Max. back pressure
    • Standard version up to 200 mbar
    • Pressure-resistant version up to 3 bar
  • Dimensions:
    • 1160 x 530 x 500 mm (H x W x D), weight 40 kg
  • Power supply: 115/230 V ; 50/60 Hz

Application examples

  • Filter industry
    • Determination of fractional separation efficiency
    • Determination of total separation efficiency
    • Long-term dusting
    • Filter media and assembled filters
    • Dust filters
    • Vacuum cleaners and vacuum filters
    • Car interior filters
    • Engine air filters
  • Calibration of particle measurement devices
  • Flow visualisation
  • Inhalation analyses
  • Tracer particles for LDA, PIV etc.

Particular advantages

  • Highest short-term and long-term dosing constancy
  • Dispersion of many different dusts
  • Disperses up to 3 bar overpressure (Version D)
  • Easy exchange of different powder reservoirs and dispersion covers
  • Easy determination and adjustment of the mass flow
  • Optional: remote control or computer control
  • Pulse operation
  • Easy cleaning of the device
  • Fast, user-friendly operation
  • Reliable function
  • Low maintenance

Please contact us for more detailed information.